AC-905

Access Control Terminal
Three access Modes: Armed (access in accordance with User Database), Disarmed
(free unrestricted access), and Locked (no access)
Up to 240 records in the User Database, each with an
individual ID Code and/or Password
Three Access Methods (selected individually for each user):
ID Card, Password, or ID Card + Password
Access to Programming Mode is protected by Master ID Card and/or Master Password
Support for normally-closed and normally-opened types of
electric locks, alarm lines, door open
sensors and exit switches
Many editable parameters such as lock activation time
and mode, alarm enable/disable, etc...
Standard Track II ISO Magnetic Card Reader with a
rated life of over 300,000 reads
Heavy-duty water-proof keypad for password entry and terminal programming
Highly reliable non-volatile memory- no backup battery
required to prevent loss of data
in the event of a power outage
Powerful Lock and Alarm Relays (15A resistive load, 3A
inductive load) with guaranteed life of 100,000 cycles
Door Open Sensor and Door Open Switch inputs with
opto-isolation to prevent problems caused by ES
Built-in Tamper Sensor to trigger the alarm if the Terminal's top cover is lifted
Wide Supply Voltage Range: 9~15V (12V nominal)
Splash-proof ABS body with metal back cover and compact
physical dimensions of 115(w) x 120(h) x 38(d) mm
Optional: RFID proximity card type version- AC903

AC906-PRW106

Cash Card Access Control System: PRW106 + AC906
PRW106 is used to program/store proximity card with values or amounts.
AC906 is used for transaction. Once card is read, pre-set
decrement will be deducted from the card and the
new value or amount will be rewritten to it.
Fast data transfer, High data integrity, True anti-collision

AC906

PRW106

Card issuer/programmer read & write.
Access Control Read / Write
RF Frequency: 13.56Mhz
RF Distance: 3 cm
DC Power: 9V / 150mA
RS232: 19200,N,8,1; Interface : RS232/RS485
Protocol : GNET PLUS
Card Type : ISO 14443A Mifare® Class Mifare® PRO Memory : 32KB
No battery backup
Dimension (mm) : W86 x L121.8 x H86
ABS housing
Application: Access/ Admission controls, Master and user
authentication control, Time and
attendance, Pre-payment, Parking payment, Ticketing, Cinemas prepayment, etc…

Express Time Recorder
Two buttons for clocking IN and OUT
Bright, high-contrast LED display shows time of day,
last four digits of the User Card
Built-in Magnetic Card, RFID, or Barcode reader
Approximately 8200 records storage capacity
Advanced memory protection and recovery mechanism
for increased reliability
Dual RS232 and RS485 interface for single
or multi-terminal communications
Convenient Machine Number setup feature using IN and
OUT buttons simplifies multi-terminal installation process
Built-in relay for external ring (bell) control,
Daily bell schedule of up to 32 different entries.
Wall-mount (default) or desktop operation with
excellent viewing angle in both positions
Firmware Management Mode (FMM) for easy internal firmware upgrades.
Built-in self-test for quick hardware check-ups
TR510 communication utility included with every Terminal
Additional free Time Manager express attendance software
Optional Magnetic Card Reader version or RFID version

Online Time recorder/ access control system
Two buttons for clocking IN and OUT
Ethernet interface connected to Ethernet hub
Works on a standard TCP/IP network
Bright , high-contrast blue LED display shows time of day ,
last 4 digits of the ID-code and error messages
Approximately 8200 records storage capacity
Convenient Machine Number setup feature using IN and OUT buttons
simplifies multi-terminal installation
Built-in Ring relay for external ring ( bell ) control
Daily bell schedule of up to 32 different entries
Built-in Magnetic Card , RFID or Mifare reader 13.56Mhz or Barcode reader
Bundled with time recorder/access control utility software
Optional Magnetic Card Reader version or RFID version

Access Control/Time Attendance recorder.
Plug and Play.
Biometric Fingerprint & Contactless smart card authentication.
Embedded Web server (TCP/IP) and Database server.
Embedded software using any Web browser.
Multi-reports: Access Log, Attendance report, Daily In/OUT and Time card reports.
Multiple verification methods: Fingerprint, smart card or password.
Easy integration with existing payroll software.
16MB Non-Volatile Memory.
Total no. of users: 1000.
Max. transaction records stored: 10,000.
Capacitive fingerprint sensor, 500dpi resolution.
Verification time < 1sec.
False rejection rate < 1%
LCD display: 20x2 with backlight.
External Controls: Door Switch, Alarm.
Power: 12VDC, 600mA.
Dimensions: 105mm(W) x 38mm(D) x 150(H)

Mini-Portable Data Collector.
Magnetic cards 3-tracks reader.
512Kbytes memory.
Built-in Real Time Clock.
Battery-Powered portable: single cell AAA battery.
Small LCD display.
RS232 or USB interface.
Applications: Employee’s Time Attendance collection,
visitors, attendants data collection.